2019 New Holland CR10.90 Combine
- Hour Meter: 15 HOURS
- STANDARD EQUIPMENT 722025
- Twin Pitch rotors (TP) Small grain / corn bean - limited numberspiked rasp bars in separation area, 2x1 finger style grates + 2x2 bar/wireseparator grates
- 13.09/1 Planetary, Diff Lock~Planetary final drive, WITH locking differential, mud seal175 cc pump / 215 cc motor - Variable HydrostatMax road speed 30kph/19mph (or 40kph/25mph with 462985option)2 Speed Gearbox:1st gear field 0-17kph/10.5mph2nd gear road 0-max speed
- Max Road Speed 40kph/25mph~Combine is adjusted to a maximum road speed of 40kph
- HD Adjustable Rear AGR~IntelliSteer ready, adjustable axle
- TW IF580/85R42-CFO-1~Alliance, Increased Flexion tire with ability to run at reducedinflation pressures. Dual
- SW 750/65R26-173A8-A~Alliance 360 - SW 750/65 R26 - 173A8 (-125)
- Platform Extension 610mm FI~Cab platform extension 24 ins (610 mm) for duals
- Axle Ext. 10.4" 265mm~AXLE EXTENSIONS 265
- Dual Wheel Mount~Required in combination with duals
- Satellite radio with external mic, USB port, 3.5 AUX on the ignitionpanel, hands-free calling and IPOD play over bluetooth, 4 speakers,Satellite receiver (Sirius / XM), CD
- Air Suspension Deluxe Seat~Air suspended cloth trimmed operator seatwith heating and cooling.Cloth instructor seat.
- Camera~One camera on strawhood plus wiring, with view integratedin IntelliView monitor; connected beneath cab
- Remote Front Face Adjust w/DFR~Feeder with Dynamic Feed Roll (DFR)Remote Front Face Adjust (FFA)
- Fixed Speed w/DSP~Fixed speed header/feeder driveFor DFR Feeder
- 100mm/3.93" Lift Cylinders DFR~100mm/3.93" Lift Cylinders for DFR feederRequired with DFR feeder for 40ft and wider draper heads,12 row folding and 16 row corn heads
- Standard Elevator w/ GrainCam~Clean grain elevator and cross auger in STD material Version for Graincam (mandatory with IntelliSenseTM 425569)
- In-cab Electric Folding Covers~Graintank with in-cab controlled covers, standard crossaugers and bubble up auger - 410bu
- Unload Folding 8.3m/27.2ft ABR~Unload Folding Tube 8.3m/27.2ft Abrasive Wear (ABR) Hydraulic folding end sectionUnload length from center of the machine - 28 ft 9 in.For 34 ft unloading length, also select 412166 Field installedextension.For controlled traffic system, use in combination with 412144 UnloadTube Ext 2.2m/7.2ft ABR FI extension and pivot spout 449757.
- Unload Tube Ext 1.7m/5.6ft ABR~5 ft 7 in (1.7m) abrasive wear extension Field installed.
- Pivot Spout Unload~Electronically controlled unload spout to adjust grain flow up to 3 ft.
- Fan Bottom Shield~Cleaning fan protection shielding
- Small Grain~Concave small grain, STD material (FF)
- Remote Adjustable Vanes~Dynamic Flow ControlTMRemote Adjustable Vanes controls threshing andseparation efficiency from in-cab.Infinite adjustment within Slow/Fast rangeRotor covers and intake plates in STD material- Available as separeted option- REQUIRED when IntelliSenseTM is selected
- Strawchopper 6Row w/Opti~Strawchopper 6 rows of knives, for PSD and Opti-SpreadTMhydraulic disc spreader adjustable from cab
- Chaff Spreader -PSD/Opti~Chaffspreader for PSD and Opti-Spread
- Remote Adjust Door w/Opti~Remote chop/drop door, for strawchopper with Opti-Spread
- Single Display~Single IntelliViewTM IV monitor (Right Hand Console)
- NH372 Antenna HP/XP FI~NH 372 GNSS Receiver activated to Level 2for compatibility with OmniSTAR HP/G2/XP &CenterPoint RTX corrections
- Autoguidance Nav II Controller~NAV III Controller REQUIRED for IntelliSteerTM auto-guidance
- GPS Antenna Mount for GT Ext.~For use with grain tank extensions.
- Yield/Moisture w/ GrainCam~Moisture and Yield sensor installed - Graincam installation(mandatory with IntelliSenseTM 425569)
- Navigation Controller Mount
- IntelliCruise~Automatic feed rate control with adaptative ground speed based oncrop load, losses and engine power- Available as separeted option- REQUIRED when IntelliSenseTM is selected
- Low speed DSP drive~Low speed Dynamic Feed Roll Drive to 640RPM (advised in corn andbeans) - FI
- Combine Automation~IntelliSenseTM – New Holland Combine AutomationContinuously self-adjust settings to reach max productivity accordingto customer strategy.Current supported crops: Wheat, Canola, Corn, SoybeansOptions REQUIRED by constrain when IntelliSenseTM is selected: IntelliCruiseTM – Feed rate control (422060) Remote Pre-sieve Adjustment (462456) Yield and Moisture Sensor with GrainCam (422108) Remote Adjustable Vanes (449743)Mu
- Folding Trailer Hitch~Header trailer hitch, rotating coupler, foldable drawbar (FI)
- LED Light Package - 3x LED beacon, 13x cab LED worklights, 2x stubble LED lights, 1x unload tube LED light, 1x graintank LED light, 4x rear work LED lights, 4x undershield LED lights, 1x engine service LED light, 1 x LED sieve light
- Sunvisor Pack~Rear, LH and RH sun visors. Front sun visor standard.
- Awning Plate Kit~Concave de-awning kit. For use in hard threshing cereals.
- Remote adjusted pre-sieve, controlled from cab or rotor frameswitch- Available as separeted option- REQUIRED when IntelliSenseTM is selected
|Make:||New Holland||SERIAL NUMBER:||612018005|