2017 New Holland CR10.90 Combine
- Hour Meter: 109 HOURS
- STANDARD EQUIPMENT 722025
- TWIN PITCH ROTOR~Limited number of spiked rasp bars in separation area, includes deawning plate
- 14.93/1 Plan, DL, Var hyd~Planetary final drive, locking differential, variable hydrostat, max road speed 40kph/25mph Increased hill climbing and fuel economy
- TW IF580/85R42-CFO-1~Duals, Alliance, Increased Flexion tire with ability to run at reduced inflation pressures
- SW750/65 R26 166A8~Mitas For adjustable rear axle Due to overall width, steering axle will be adjusted in a narrow position for transport. Axle will need to be adjusted out at PDI.
- Cab platform extension 24 ins (610 mm) for duals
- 10.4 in. 265mm~Axle extensions for planetary propulsion system. For use with duals set on 30 in. rows.
- Required in combination with duals
- SATELITE RADIO-Sirius/XM receiver, AM/FM, Bluetooth, CD and MP3 player
- Air suspended cloth trimmed operator seat with heating and cooling. Cloth instructor seat.
- One camera on strawhood plus wiring, with view integrated in IntelliView monitor; connected beneath cab
- Rear, LH and RH sun visors. Front sun visor standard.
- LF/FFA CONV ST TR M~Feeder with Dynamic Feedroll, front face adjust, lateral float
- 90mm/3.5in. Lift Cylinders DSP - Required with DFR feeder 422675. Required for 40ft and wider draper heads, 12 row folding and 16 row corn heads
- Graintank with in-cab controlled covers, standard cross augers and abrasive bubble up auger CR8.90 Elevation - 355bu CR9.90 Elevation/CR10.90 Elevation - 410bu
- Abrasive wear auger with folding end section Unloading length from center of machine - 28 ft 9 in For 34 ft unloading length, also select 412166Field installed extension
- 5ft 7 in (1.7m) abrasive wear extension, Field installed.
- Angled, pivoting unloading spout
- Cleaning fan protection shielding
- 6 row straw chopper, PSD, Opti-Spread
- Two IntelliView IV color monitors with touch screen
- NH 372 GNSS Receiver activated to Level 2 for compatibility with OmniSTAR HP/G2/XP & CenterPoint RTX corrections
- IntelliCruise~Automatic feed rate control.
- 7 cfm @ 1,000 RPM/14 cfm @ 2,000 RPM with 16 gallon pressure tank. 4 outlet points located around the combine and a 33 ft. air hose and wand.
- Advised for dry crop conditions. Requires 722525 Engine air compressor.
- Folding Trailer Hitch
- Includes 26 LED work and service lights, 2 halogen work lights and 3 LED beacons
- Set of 2 LED lights mounted under cab roof
- Handheld portable halogen service light, uses 12V source on combine
|Year:||2017||LOCATION:||North Battleford, SK|
|Make:||New Holland||SERIAL NUMBER:||631988001|