Instagram Twitter Facebook
+084 123456789

  • No Image Available
  • Hour Meter: 109 HOURS
  • TWIN PITCH ROTOR~Limited number of spiked rasp bars in separation area, includes deawning plate
  • 14.93/1 Plan, DL, Var hyd~Planetary final drive, locking differential, variable hydrostat, max road speed 40kph/25mph Increased hill climbing and fuel economy
  • TW IF580/85R42-CFO-1~Duals, Alliance, Increased Flexion tire with ability to run at reduced inflation pressures
  • SW750/65 R26 166A8~Mitas For adjustable rear axle Due to overall width, steering axle will be adjusted in a narrow position for transport. Axle will need to be adjusted out at PDI.
  • Cab platform extension 24 ins (610 mm) for duals
  • 10.4 in. 265mm~Axle extensions for planetary propulsion system. For use with duals set on 30 in. rows.
  • Required in combination with duals
  • SATELITE RADIO-Sirius/XM receiver, AM/FM, Bluetooth, CD and MP3 player
  • Air suspended cloth trimmed operator seat with heating and cooling. Cloth instructor seat.
  • One camera on strawhood plus wiring, with view integrated in IntelliView monitor; connected beneath cab
  • Rear, LH and RH sun visors. Front sun visor standard.
  • LF/FFA CONV ST TR M~Feeder with Dynamic Feedroll, front face adjust, lateral float
  • 90mm/3.5in. Lift Cylinders DSP - Required with DFR feeder 422675. Required for 40ft and wider draper heads, 12 row folding and 16 row corn heads
  • Graintank with in-cab controlled covers, standard cross augers and abrasive bubble up auger CR8.90 Elevation - 355bu CR9.90 Elevation/CR10.90 Elevation - 410bu
  • Abrasive wear auger with folding end section Unloading length from center of machine - 28 ft 9 in For 34 ft unloading length, also select 412166Field installed extension
  • 5ft 7 in (1.7m) abrasive wear extension, Field installed.
  • Angled, pivoting unloading spout
  • Cleaning fan protection shielding
  • 6 row straw chopper, PSD, Opti-Spread
  • Two IntelliView IV color monitors with touch screen
  • NH 372 GNSS Receiver activated to Level 2 for compatibility with OmniSTAR HP/G2/XP & CenterPoint RTX corrections
  • IntelliCruise~Automatic feed rate control.
  • 7 cfm @ 1,000 RPM/14 cfm @ 2,000 RPM with 16 gallon pressure tank. 4 outlet points located around the combine and a 33 ft. air hose and wand.
  • Advised for dry crop conditions. Requires 722525 Engine air compressor.
  • Folding Trailer Hitch
  • Includes 26 LED work and service lights, 2 halogen work lights and 3 LED beacons
  • Set of 2 LED lights mounted under cab roof
  • Handheld portable halogen service light, uses 12V source on combine
Fields marked with an * are required
2017 New Holland CR10.90 Combine
Equipment Information
$890,878.50 CAD
New Holland (NH)
Combine (CO)
North Battleford, SK (3064462223)
Share To Social Media Or Email
Subscribe To Our Newsletter

Subscribe to our mailing list to receive exclusive discounts, promotions, information on new and used equipment, and special events.

What Interests You?